| Popis: |
Reinforced concrete structures are subjected to damage due to environmental loading and operational conditions. Early detection of damages in reinforced concrete structures is very important. However, this becomes difficult because failure at the micro level in the form of minute cracks, develops much earlier than the visual appearance of actual damages resulting out of coalesce of several such micro level damages. Vibration based damage detection techniques, particularly use of modal testing by exciting a structure dynamically and measuring resulting responses is well established in current practice. Still, real experimental investigation involving a full scale reinforced concrete structure is somewhat rare in current literature. In the present investigation, dynamic responses of a 3.3-metre long reinforced concrete beam were measured experimentally before and after damage. Damage in the form of flexural cracks was inflicted by applying quasi-static load using a universal testing machine of capacity 300 kN under the four-point bending configuration. Broadband roving impact excitation was imparted through an impact hammer and the resulting responses were picked up by a single accelerometer. The time signals of both the force and acceleration responses were Fourier transformed using a spectrum analyser to determine the frequency response functions. The modal parameters e.g. frequencies, mode shapes, modal damping factors are found out through curve fitting. The frequency response function at a particular point has also been investigated for all the load increments and gradual changes into the dynamic properties are noted. Comparison of modal parameters between the undamaged and damaged state including their curvatures indicates that they are sensitive to the crack locations. On the other hand, the differences in frequency response functions including their curvatures were sensitive to the damage intensity in turn. The current experimental investigation provides great insight into the application of vibration-based damage detection technique to reinforced concrete structures. |
