| Autor: |
Hong Tao Gao, Yu Fen Liang, Yong Qing Ma, Xiao Jing Zhang |
| Rok vydání: |
2011 |
| Předmět: |
|
| Zdroj: |
Advanced Materials Research. :813-818 |
| ISSN: |
1662-8985 |
| DOI: |
10.4028/www.scientific.net/amr.415-417.813 |
| Popis: |
Along with increasing W and Mo contents in Cr-W-Mo-V high alloy medium-upper carbon steels, the maximal hardness of secondary hardening during tempering is increasing gradually and arrives to 66.8HRC, and the congruent quenching temperature and the tempering temperature corresponding to maximal hardness are ascending. The quenching microstructure of experimental steels is matrix and a small quantity of undissolved carbides when the hardness is maximal, wich is corresponding to tempering temperature of remnant austenitic decomposing acutely. The precipitation of M6C and MC carbides was detected, and M7C3 and M3C carbides was detected too. But M23C6 carbide did not appear and M2C carbide was detected undistinguishably. The temperature range of tempering maximal hardness is 500°C-550°C, and an exact temperature is opposite to the mass fraction ratio of equilibrium carbide phases at the temperature. The tempering hardness value can be obtained from HS= a(1+b)/(0.0127a+0.00297), in which a is square root of saturation level of the carbon in the matrix and b is correction factor having something to do with alloy elements of carbide precipitation. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
