Parametric Modeling Studies for Sediment Deposition as Sites for Under-Deposit Corrosion in Oil Transmission Pipelines
| Autor: | Patrick G. Boisvert, Trevor Place, Allan Runstedtler |
|---|---|
| Rok vydání: | 2015 |
| Předmět: |
business.industry
General Chemical Engineering Flow (psychology) General Chemistry Computational fluid dynamics Deposition (geology) Corrosion Volumetric flow rate Pipeline transport Pitting corrosion Environmental science General Materials Science Geotechnical engineering business Parametric statistics |
| Zdroj: | Corrosion. 71:726-736 |
| ISSN: | 1938-159X 0010-9312 |
| Popis: | Transmission heavy crude oil carries water-wetted solid particles. Studies have shown that these particles can accumulate on the pipe floor and cause under-deposit corrosion and that the incidence of accumulation is strongly correlated to locations downstream of overbends. Computational fluid dynamics (CFD) analysis of light and heavy crude oil flows in a representative segment of a real transmission pipeline suggested that the deposition patterns in heavy oil flow are a result of low near-wall velocity, especially downstream of overbends, which prevents the flow from sweeping particles along the pipe floor, not the tendency of particles to fall to the pipe floor. The objective of the present study was to provide information that would help establish mitigation strategies. The present parametric study used the CFD model to predict the decrease in near-wall velocity at the pipe floor downstream of overbends for different pipe diameters and oil flow rates and properties. This information provided the basis for mapping the transition from light oil behavior to heavy oil behavior. The results were condensed to a chart that provides the reduction in near-wall velocity downstream of overbends as a function of the Reynolds number. It indicated a sharp overbend effect as the Reynolds number decreased below 30,000. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|