Photocatalytic performance of electrospun CNT/TiO2 nanofibers in a simulated air purifier under visible light irradiation
Autor: | Mathana Wongaree, Siriluk Chiarakorn, Surawut Chuangchote, Takashi Sagawa |
---|---|
Rok vydání: | 2016 |
Předmět: |
Materials science
Health Toxicology and Mutagenesis Nanotechnology 02 engineering and technology General Medicine 010402 general chemistry 021001 nanoscience & nanotechnology 01 natural sciences Pollution Electrospinning 0104 chemical sciences chemistry.chemical_compound chemistry Chemical engineering Nanofiber Specific surface area Air treatment Titanium dioxide Photocatalysis Environmental Chemistry Air purifier 0210 nano-technology Visible spectrum |
Zdroj: | Environmental Science and Pollution Research. 23:21395-21406 |
ISSN: | 1614-7499 0944-1344 |
DOI: | 10.1007/s11356-016-7348-z |
Popis: | The photocatalytic treatment of gaseous benzene under visible light irradiation was developed using electrospun carbon nanotube/titanium dioxide (CNT/TiO2) nanofibers as visible light active photocatalysts. The CNT/TiO2 nanofibers were fabricated by electrospinning CNT/poly(vinyl pyrrolidone) (PVP) solution followed by the removal of PVP by calcination at 450 °C. The molar ratio of CNT/TiO2 was fixed at 0.05:1 by weight, and the quantity of CNT/TiO2 loaded in PVP solution varied between 30 and 60 % wt. CNT/TiO2 nanofibers have high specific surface area (116 m2/g), significantly higher than that of TiO2 nanofibers (44 m2/g). The photocatalytic performance of the CNT/TiO2 nanofibers was investigated by decolorization of 1 × 10−5 M methylene blue (MB) dye (in water solution) and degradation of 100 ppm gaseous benzene under visible light irradiation. The 50-CNT/TiO2 nanofibers (calcined CNT/TiO2 nanofibers fabricated from a spinning solution of 50 % wt CNT/TiO2 based on PVP) had higher MB degradation efficiency (58 %) than did other CNT/TiO2 nanofibers and pristine TiO2 nanofibers (15 %) under visible light irradiation. The photocatalytic degradation of gaseous benzene under visible light irradiation on filters made of 50-CNT/TiO2 nanofibers was carried out in a simulated air purifier system. Similar to MB results, the degradation efficiency of gaseous benzene by 50-CNT/TiO2 nanofibers (52 %) was higher than by other CNT/TiO2 nanofibers and pristine TiO2 nanofibers (18 %). The synergistic effects of the larger surface area and lower band gap energy of CNT/TiO2 nanofibers were presented as strong adsorption ability and greater visible light adsorption. The CNT/TiO2 nanofiber prepared in this study has potential for use in air purifiers to improve air treatment efficiency with less energy. |
Databáze: | OpenAIRE |
Externí odkaz: |