Comparison of Two Filter Design Methods for Conducted EMI Suppression of PMSM Drive System for Electric Vehicle

Autor:	Li Zhai, Guixing Hu, Chao Song, Mengyuan Lv, Xueying Zhang
Rok vydání:	2021
Předmět:	Computer Networks and Communications Computer science Aerospace Engineering Electromagnetic interference Filter design Filter (video) EMI Automotive Engineering Electronic engineering Insertion loss Electrical and Electronic Engineering Active filter Electronic filter Voltage
Zdroj:	IEEE Transactions on Vehicular Technology. 70:6472-6484
ISSN:	1939-9359 0018-9545
DOI:	10.1109/tvt.2021.3080924
Popis:	In order to solve the problem that the conducted voltage of a motor drive system for electric vehicle (EV) exceeds the standard limits of CISPR25-2016, two different design methods of electromagnetic interference (EMI) filter for HV power supply were proposed. The first method is to design a wide-band EMI filter based on engineering method. It can achieve the insertion loss of 60 dB within 150 kHz--108 MHz. Another proposed method is to design the EMI filter based on the resonance peaks suppression. During the second filter design process, by analyzing the common mode (CM) and differential mode (DM) interference paths at two key frequency points 1 MHz and 30 MHz, the dominated parameters responsible for the over-standard points were determined, and the CM and DM filter circuit was designed accordingly. Compared with the filter designed by the first method, the filter designed based on resonance peaks suppression can better meet the design goals, without further rectification according to the tests, and it is smaller in size, only 1/4 of the filter size designed by the first method, lower in cost, and easy to be engineering.
Databáze:	OpenAIRE
Externí odkaz:	https://explore.openaire.eu/search/publication?articleId=doi_________::7bbdfa9b62257007e6f0d5c4ff0c059d https://doi.org/10.1109/tvt.2021.3080924 Zobrazit plný text záznamu