| Popis: |
The Nong Yao field is a marginal oil field that presents many challenges, both geological (thin hydrocarbon column and structural uncertainty due to shallow gas effects) and with well design (shallow depth and unconsolidated reservoirs). The field has been on production for almost five years with water cut in most wells now over 90%. The key to extending field life is identifying new infill locations, with advanced technology required to identify and drill these targets. To improve seismic image and structural definition, the seismic data was reprocessed in 2016, utilizing the latest technologies including Broadband Processing and Full Waveform Inversion. This detected local unswept structures and thin reservoirs allowing for identification of infill targets. New generation hydrocarbon saturation cased hole logs were run in wells to identify swept versus bypassed oil areas. Many infill opportunities required complex 3-D well trajectories and innovative completions. To achieve these objectives, technology such as high build rate rotary steerable systems, advanced real time survey corrections, a multilayer bed boundary detection tool, rotational friction transducer and inflow control devices were implemented. After four years of production, a key well exhibited significantly more production than expected, indicating a much larger reservoir than modelled. However, water cut in this well had reached 98%, so infill wells were required in order to extend production. The reprocessed seismic indicated that the structure extended further to the east of the existing producer than initially modelled. A cased hole saturation log was acquired in an existing well drilled near the planned landing location, which showed that the reservoir was actually swept in this area. Instead, the infill well was landed and drilled in the opposite direction in this eastern part of the structure, keeping the heel away from the water, but providing a much more challenging well path. A high-build rate rotary steerable system, advanced real time survey correction and rotational friction transducer were used to safely deliver this complex 3-D well profile and avoid collision risk from offset wells. The multilayer bed boundary detection tool was then used to ensure the horizontal well stayed as high as possible whilst remaining within the reservoir. Lastly, an inflow control device was installed in the horizontal section to delay water production. The well came online with 0% water cut and is an excellent producer. Similar methods have been adopted at other locations to identify and drill infill targets with great success. Collaboration across disciplines is key, as input is required from the geologist, geophysicist, petrophysicist, reservoir engineer, drilling engineer and completion engineer to identify, drill and produce these infill targets. Implementation of this approach continues to add new volumes and extend field life. |
