Seismic Behavior of Geosynthetic-Reinforced Soil (GRS) Bridge Abutments with Concrete Block Facing—an Analytical Study
Autor: | Philip Meinholz, Vahid Alizadeh, Sam Helwany, Jonathan T. H. Wu, Roonak Ghaderi |
---|---|
Rok vydání: | 2017 |
Předmět: |
Engineering
Environmental Engineering Parametric analysis business.industry Seismic loading 0211 other engineering and technologies Transportation 02 engineering and technology Structural engineering Geotechnical Engineering and Engineering Geology Finite element method Bridge (nautical) 021105 building & construction Types of earthquake Earthquake shaking table Geotechnical engineering business 021101 geological & geomatics engineering Civil and Structural Engineering Block (data storage) Parametric statistics |
Zdroj: | Transportation Infrastructure Geotechnology. 4:52-83 |
ISSN: | 2196-7210 2196-7202 |
DOI: | 10.1007/s40515-017-0041-y |
Popis: | The response of GRS bridge abutments to earthquake loading remains a concern despite their great success under static loads. In order to advance and implement this new technology, especially in seismically active regions, the study described in this paper and the companion paper was undertaken to examine the performance of GRS bridge abutments under seismic loads in a rational and critical manner. In this study, a field-scale shake table test was performed in order to provide relevant test results to validate an analytical procedure for GRS abutments that was used subsequently to perform a rigorous parametric analysis that formed the basis for the proposed guidelines for design and construction of earthquake-resistant GRS abutments. This paper describes the validation of a finite element model where its analytical results were compared with the results of the instrumented GRS bridge abutment shake table test described in the companion paper titled: “Seismic behavior of geosynthetic-reinforced soil (GRS) bridge abutments with modular-block facing—an experimental study.” After validation is achieved, the finite element modeling was used to perform rigorous parametric analyses on a bridge with GRS abutments subjected to various types of earthquake loading. |
Databáze: | OpenAIRE |
Externí odkaz: |