Zero valent nano-sized iron/clinoptilolite modified with zero valent copper for reductive nitrate removal

Autor: Cavus Falamaki, Fatemeh Sadat Fateminia
Rok vydání: 2013
Předmět:
Zdroj: Process Safety and Environmental Protection. 91:304-310
ISSN: 0957-5820
DOI: 10.1016/j.psep.2012.07.005
Popis: Nitrates constitute one of the main toxic contaminants of groundwater. On the other hand, groundwater may be considered anoxic (oxygen concentration less than 9 μg L −1 ). This fact justifies the use of nano zero valent metals for nitrate removal. In such conditions, zero valent metals are quite stable against oxidation due to the very low level of dissolved oxygen concentration. It has been shown that the performance of zero valent iron coated clinoptilolite zeolite for the reduction of nitrate anion in un-buffered conditions may be enhanced by coating small amounts of Cu 0 onto the freshly prepared Fe 0 /zeolite composite. An optimum loading of Cu 0 exists for which the rate of nitrate removal is maximal. For this optimal composition, the nitrite anion production curve with time passes through a maximum. Nitrite production, however, is slightly higher for the Cu modified zeolite. It has been shown that the nitrate removal process is only slightly dependent on the initial solution pH. In the temperature range of 20–60 °C, the process is controlled by both the liquid phase mass transfer and intrinsic reaction rate resistances. FESEM analysis of the zero valent metal/zeolite composite showed that upon the metal reduction reaction, an egg-shell distribution of zero valent metal in the zeolite agglomerate particle is produced.
Databáze: OpenAIRE
Externí odkaz: