Stability analysis of anti-dip bedding rock slopes using a limit equilibrium model combined with bi-directional evolutionary structural optimization (BESO) method
Autor: | Xinping Li, Tingting Liu, Yun Zheng, Fei Meng, Luyang Ding |
---|---|
Rok vydání: | 2021 |
Předmět: |
Surface (mathematics)
Work (thermodynamics) Bedding 0211 other engineering and technologies 02 engineering and technology 010502 geochemistry & geophysics Geotechnical Engineering and Engineering Geology 01 natural sciences Stability (probability) Computer Science Applications Genetic algorithm Ultimate tensile strength Geotechnical engineering Limit (mathematics) Engineering design process Geology 021101 geological & geomatics engineering 0105 earth and related environmental sciences |
Zdroj: | Computers and Geotechnics. 134:104116 |
ISSN: | 0266-352X |
DOI: | 10.1016/j.compgeo.2021.104116 |
Popis: | Anti-dip bedding rock slope (ABRS) is a very common type of rock slopes in nature and engineering construction. However, the stability assessment of ABRSs is still a hard problem for geotechnical engineers due to the difficulty in finding the critical failure surface. In this work, a new method called LEM-BESO was proposed to tackle this problem based on limit equilibrium theory and bi-directional evolutionary structural optimization method. Two model tests reported in previous studies were employed to verify the correctness of the LEM-BESO method. Moreover, a comparative study of the LEM-BESO method and the genetic algorithm was also conducted. The highly consistent results demonstrate that using the LEM-BESO method can accurately predict the failure surface of the slope. Then, the LEM-BESO method was extended to study the influence of two key parameters (i.e. friction angle of the joints and tensile strength of the rock layers) on the failure mechanism of anti-dip bedding rock slopes. The results show that these two parameters have a significant influence on the stability of the slope. However, the failure surface is insensitive to the tensile strength of the rock layers. The LEM-BESO method provides an effective means for the stability evaluation and engineering design of ABRSs. |
Databáze: | OpenAIRE |
Externí odkaz: |