Influence of in-flight particle characteristics and substrate temperature on the formation mechanisms of hypereutectic Al-Si-Cu coatings prepared by supersonic atmospheric plasma spraying
| Autor: | Hai-chao Zhao, Liu Ming, He Pengfei, Jian-jiang Tang, Hai-dou Wang, Yu Bai, Tian-yang Yu, Guo-zheng Ma, Ling Tang, Dong-yu He, Yu Wang |
|---|---|
| Rok vydání: | 2021 |
| Předmět: |
Equiaxed crystals
Materials science Polymers and Plastics Mechanical Engineering Metals and Alloys 02 engineering and technology engineering.material 010402 general chemistry 021001 nanoscience & nanotechnology Microstructure 01 natural sciences 0104 chemical sciences Coating Mechanics of Materials Phase (matter) Materials Chemistry Ceramics and Composites engineering Particle Composite material 0210 nano-technology Thermal spraying Solid solution Eutectic system |
| Zdroj: | Journal of Materials Science & Technology. 87:216-233 |
| ISSN: | 1005-0302 |
| DOI: | 10.1016/j.jmst.2021.01.048 |
| Popis: | Hypereutectic Al-Si-Cu coatings were prepared by supersonic atmospheric plasma spraying to enhance the surface performance of lightweight alloys. To find out optimum process conditions and achieve desirable coatings, this work focuses on the influence of three important parameters (in-flight particle temperature, impact velocity, and substrate temperature) on the collected splats morphology, coatings microstructure and microhardness. Results show that appropriate combinations of temperature and velocity of in-flight particles cannot only completely melt hypereutectic Al-Si-Cu particles, especially the primary Si phase, but also provide the particles with sufficient kinetic energy. Thus, the optimized coating consists of 98.6 % of fully-melted region with nanosized coupled eutectic and 0.9 % of porosity. Increasing the substrate deposition temperature promotes the transition from inhomogeneous banded microstructure to homogeneous equiaxed microstructure with a lower porosity level. The observations are further interpreted by a newly developed phase-change heat transfer model on quantitatively revealing the solidification and remelting behaviors of several splats deposited on substrate. Besides, phase evolutions including the formation of supersaturated α-Al matrix solid solution, growth of Si and Al2Cu phases at different process conditions are elaborated. An ideal microstructure (low fractions of unmelted/partially-melted regions and defects) together with solid solution, grain refinement, and second phase strengthening effects contributes to the enhanced microhardness of coating. This integrated study not only provides a framework for optimizing Al-Si based coatings via thermal spraying but also gives valuable insights into the formation mechanisms of this class of coating materials. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect