| Autor: |
Harry J. Levinson, Hidekazu Yoshida, Vishnu Kamat, Yunfei Deng, Tamer H. Coskun, Yuangsheng Ma, Jason Sweis, Jongwook Kye |
| Rok vydání: |
2011 |
| Předmět: |
|
| Zdroj: |
SPIE Proceedings. |
| ISSN: |
0277-786X |
| DOI: |
10.1117/12.879793 |
| Popis: |
Double patterning technology (DPT) provides the extension to immersion lithography before EUV lithography or other alternative lithography technologies are ready for manufacturing. Besides the additional cost due to DPT processes over traditional single patterning process, DPT design restrictions are of concerns for potential additional design costs. This paper analyzes design restrictions introduced by DPT in the form of DPT restricted design rules, which are the interface between design and technology. Both double patterning approaches, Litho-Etch-Litho-Etch (LELE) and Self-Aligned Double Patterning with spacer lithography (SADP), are studied. DPT design rules are summarized based on drawn design layers instead of decomposed layers. It is shown that designs can be made DPT compliant designs if DPT design rules are enforced and DPT coloring check finds no odd cycles. This paper also analyzes DPT design rules in the design rule optimization flow with examples. It is essential to consider DPT design rules in the integrated optimization flow. Only joint optimization in design rules between design, decomposition and process constraints can achieve the best scaled designs for manufacturing. This paper also discusses DPT enablement in the design flow where DPT aware design tools are needed so that final designs can meet all DPT restricted design rules. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
