The Influence of Surface Treatment on Wettability of TiNi-Based Alloy
Autor: | Kirill Dubovikov, O. V. Kokorev, Yu. F. Yasenchuk, Gulsharat Baigonakova, Sergey Gunther, Ekaterina Marchenko, Victor Gunther |
---|---|
Rok vydání: | 2019 |
Předmět: |
010302 applied physics
Materials science 010308 nuclear & particles physics Alloy technology industry and agriculture General Physics and Astronomy engineering.material equipment and supplies 01 natural sciences Surface energy Grinding chemistry.chemical_compound chemistry Etching (microfabrication) 0103 physical sciences engineering Sand blasting Wetting Composite material Hydrogen peroxide |
Zdroj: | Russian Physics Journal. 62:333-338 |
ISSN: | 1573-9228 1064-8887 |
Popis: | The results of an investigation of surface wettability of TiNi-based alloys by water and DMEM-medium are presented. A comparative analysis of the wetting angle is performed after processing the specimens by grinding, sand blasting, oxidation in air, etching in a solution of acids, processing by vapor, hydrogen peroxide, and detergent solution in an ultrasonic bath. It is shown that oxidation in air and etching in acids increase the surface hydrophilic property of TiNi-based alloys. The highest hydrophilic value with the water wetting angle about 30° is achieved in the case of vapor treatment following sand blasting and treatment of the oxidized specimens with hydrogen peroxide. The differing influence of treatments on the wetting angle is attributed to variations in the surface energy of TiNi-based alloy specimens, which is affected by the microrelief and structural-chemical characteristics of the surface. |
Databáze: | OpenAIRE |
Externí odkaz: |