Elements Diffusion and Mechanical Properties of 15-5PH Stainless Steel Joint Brazed with BNi-2 Filler Metal
| Autor: | Sheng Lu, Qian Qian Sun |
|---|---|
| Rok vydání: | 2016 |
| Předmět: |
0209 industrial biotechnology
Materials science Filler metal Mechanical Engineering Metallurgy chemistry.chemical_element 02 engineering and technology Condensed Matter Physics 020501 mining & metallurgy Nickel 020901 industrial engineering & automation Brittleness 0205 materials engineering chemistry Mechanics of Materials Melting point Brazing General Materials Science Composite material Base metal Joint (geology) Solid solution |
| Zdroj: | Materials Science Forum. 850:700-705 |
| ISSN: | 1662-9752 |
| DOI: | 10.4028/www.scientific.net/msf.850.700 |
| Popis: | The effects of brazing time on elements diffusion and bonding strength of vacuum brazed joints of 15-5PH stainless steel using filler metal BNi-2 were investigated. The results showed that the brazing time determined the content of diffused elements. If holding time is short the distribution of melting point depressants (MPD) concentrated on the middle zone of the joint, and the generation of brittle phases in the joint was unavoidable. With increasing time, MPD can diffuse to base metal adequately and full solid solution of nickel formed in the brazing joint. Joint strength firstly increased and then decreased with prolonging holding time. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|