Influence of silver surface treatment and frictional materials on the operating properties of piezo-electric actuators
| Autor: | Audrius Žunda, E. R. Kutelia, Juozas Padgurskas, Valentin Michailov, D. Gventsadze, Raimundas Rukuiža |
|---|---|
| Rok vydání: | 2018 |
| Předmět: |
Materials science
Continuous operation Mechanical Engineering Rotational speed 02 engineering and technology Surfaces and Interfaces Tribology 021001 nanoscience & nanotechnology Clamping Surfaces Coatings and Films Grinding 020303 mechanical engineering & transports 0203 mechanical engineering Mechanics of Materials Torque Composite material 0210 nano-technology Contact area Actuator |
| Zdroj: | Tribology International. 120:179-186 |
| ISSN: | 0301-679X |
| DOI: | 10.1016/j.triboint.2017.12.039 |
| Popis: | The tribological effect of differently processed silver coatings and frictional materials on the operating efficiency of piezo-electric actuators (PEA) when using different frictional contact materials were investigated. Best results for PEA speed stability and load-bearing capacity range are obtained when silver coating operates with diatomite compound with minium. Grinding of the silver coating surface improves the PEA characteristics by increasing the effective contact area, i.e. continuous operation of PEA was at relatively wide loading range and the rotation speed was higher. The decrease of rotational speed due to higher loading can be compensated by clamping force. At low loading output torque the frictional material with corundum ensures maximum speed; so this material could be used for low loaded high-speed actuators. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect