| Autor: |
E Donahue, G.E. Lucas, G.R. Odette |
| Rok vydání: |
2000 |
| Předmět: |
|
| Zdroj: |
Journal of Nuclear Materials. :637-641 |
| ISSN: |
0022-3115 |
| DOI: |
10.1016/s0022-3115(00)00275-0 |
| Popis: |
A constitutive model for low-to-intermediate temperatures, strains, and strain rates is developed for the program heat of V–4Cr–4Ti. The basic form of the model is derived from more general dislocation-based models of yield stress and strain hardening. The physically based forms are fit to a database derived from tensile tests carried out over a wide range of temperatures and strain rates. Yield and post-yield strain-hardening contributions to the flow stress are additive. The yield stress has both thermally activated and athermal components. The former is described by a two-mechanism activated dislocation slip model, with contributions that appear to arise from both lattice friction (at lower temperatures) and dislocation pinning by interstitial impurities (at higher temperatures). The yield stress data can be correlated using a strain rate-compensated temperature. The model uses a temperature-weighted average of the two mechanisms. Post-yield strain hardening was found to be approximately athermal. Strain hardening is fit to a two-component modified Voce-type saturating flow stress model. The constitutive model is also used to determine the flow stability limits as estimates of uniform tensile strains. The relatively compact, but mechanism-based, semi-empirical model has a number of both fundamental and practical advantages that are briefly outlined. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect