Parameters of flow in a section compressed by transverse floodplain dams

Autor: M. Bakiev, A. Jakhonov, Sh Panjiev, U. Kaxxarov
Rok vydání: 2020
Předmět:
Zdroj: IOP Conference Series: Materials Science and Engineering. 883:012016
ISSN: 1757-899X
1757-8981
DOI: 10.1088/1757-899x/883/1/012016
Popis: On floodplain rivers there are characteristic features of the construction of hydrotechnical structures, which in their design should be done taking into account this. These are the different types of floodplain and other floodplain, changes in the period of floodplain inflow, the interaction of flow and floodplain flows, the ability of floodplain rivers to water, the speed of flow and the features of turbidity, etc. The main purpose of this study is to develop a method of determining flow parameters in a two-way compressed cross-section with cross-dumbbells in the floodplain, taking into account the different bias of the Ozen and floodplain as well as the interaction of flows Experimental studies were conducted for parallel case of two-sided poise Ozen and poise flow arrows. The width of the beams is 85 sm, the width of the beams is 30 sm, the length of the lath is 11 m, the slope is i=0.0005, the slope is n=0.016 and the parameter of the dumbbells is n n =0.023. The flow parameters are long F rp =0.01-0.3, R ep >10000, floodplain F rn =0.01-0.18: R ep >4000. On the surface, the change in the compression coefficient EPR in the cases of dumbbells installation angle α d α d ≥900 was found to be heterogeneous and analytical expressions and graphs were developed to determine their values. The formulas for determining the speed of flow in a compressed cross-sectional area were proposed, taking into account the subordination of speed scanning to the expression Shlixting-Ayramovich in the zone of interaction by applying the equations of motion and consumption preservation
Databáze: OpenAIRE