| Popis: |
Proppant placement in a tight formation is extremely challenging. Therefore, using a high viscous friction reducer (HVFR) as a fracturing fluid for stimulation treatment in tight gas reservoirs is increasing within the industry because it can transport proppant, help reduce pipe friction generated during hydraulic-fracturing treatments, and efficiently clean up similar to the lower viscosity friction reducers (FRs). In this paper the implementation of the robust HVFR that is building higher viscosity at low concentrations, which minimizes energy loss and promotes turbulent flow within the pipe during the pumping of low viscosity, is discussed in detail. Performance evaluation of the new HVFR was conducted in the laboratory and compared to the lower viscosity FR. The study consisted of viscosity measurements at 70 and 180°F, compatibility with other additives, and proppant transport capabilities. Additionally, the viscosity generated from both FRs was compared using two water sources: water well A and treated sewage water. Viscosity measurements were performed across a wide range of FR and HVFR concentrations and under varying shear rates using a digital viscometer. To validate drag reduction capabilities for this HVFR in the field, the same groundwater with low salinity and low total dissolved solids (TDS) content were used for comparison purposes. The test plan for this new HVFR was for a well to be drilled to a total depth of 17,801 ft MD (10,693 ft TVD) with a 6,016-ft lateral section. Another part of the plan was to complete 41 stages—the first stage with the toe initiator, and subsequent stages using ball drops until Stage 8, were completed using the current FR. For Stage 8, the drag reduction from the new HVFR was evaluated against the current FR only during the pad stage. Then, FR or HVFR concentrations were used, with a gradual reduction from 2 to 1 gpt without compromising proppant placement from stages 9 to 37, alternating current FR and the new HVFR every four stages. From Stage 38 to 41, the same approach was used but with treated sewage water and alternating every other stage using current FR or HVFR at 1gpt. The implementation of the new HVFR showed better friction reduction when using the same concentration of the current FR. Also, achieving better average treating pressures with lower concentration. Based on that it is a cost-effective solution and the performance is better, this lead to reduce the HVFR volume to be pumped per stage compared to the current FR. Applications/Significance/Novelty For this study, drag reduction capabilities for this new HVFR were validated in the field at higher pumping rate conditions, potentially optimizing (reducing) the polymer concentration during a freshwater application. It was shown that lower concentrations of this HVFR provided higher viscosity, which helps improve proppant transport and operation placement. |
