Interfacial Optimization of Acetate Taffeta Fabric/PLA Composites

Autor:	Byung Sun Kim, Jin Woo Yi, Seul Ki Kim, Jung Ii Song, Jong Rok Ha
Rok vydání:	2011
Předmět:	Glow discharge Materials science Silanes Polymers and Plastics Scanning electron microscope Silane Polyelectrolyte Plasma polymerization Lactic acid chemistry.chemical_compound chemistry Ultimate tensile strength Materials Chemistry Ceramics and Composites Composite material
Zdroj:	Polymers and Polymer Composites. 19:87-90
ISSN:	1478-2391 0967-3911
DOI:	10.1177/0967391111019002-306
Popis:	For the interfacial optimization of Acetate Taffeta Fabric (ATF) with Poly Lactic Acid (PLA), steady-state uniform atmospheric glow discharge (AGD) and Silane treatments were studied, respectively. In AGD, the plasma polymerization time for ATF was varied up to 3 minutes. In silane treatments, three types of silane coupling agents, aminoethylaminopropyl-trimethoxysilane, 3-glycidoxypropyl-trimethoxysilane and 3-methacryloxypropyltrime-thoxysilane, were used respectively with concentrations ranging from 0 to 5%. Silane coupling agent was chosen since -OH in silane always reacts with -OH in PLA. Also, all three silanes have similar chemical structures with that of Lactic Acid. The sizing on the fabric was with a solution containing PVA, acryl and water at the ratio of 3:1:96. Peel tests were carried out for the surface modified fabrics before and after removing the sizing. Highest peel test results was obtained with 3% silane concentration. Tensile tests were carried out before analyzing the fracture surface of the composites by scanning electron microscope. Compared to raw fabric, plasma and silane treatments have improved the tensile strength at maximum of 30.4 and 27.4%, respectively.
Databáze:	OpenAIRE
Externí odkaz:	https://explore.openaire.eu/search/publication?articleId=doi_________::7317caf816fcf76c89dffbdc1ae5ced2 https://doi.org/10.1177/0967391111019002-306 Zobrazit plný text záznamu