Micro/nano-fibrillated cellulose (MFC/NFC) fibers as an additive to maximize eucalyptus fibers on tissue paper production
| Autor: | Flávia P. Morais, Joana M. R. Curto, Maria Emília Amaral, Ana M. M. S. Carta |
|---|---|
| Rok vydání: | 2021 |
| Předmět: |
Absorption of water
Softwood Materials science Polymers and Plastics 02 engineering and technology 010402 general chemistry 021001 nanoscience & nanotechnology 01 natural sciences 0104 chemical sciences Tissue paper chemistry.chemical_compound chemistry Fiber Cellulose Fourier transform infrared spectroscopy Composite material 0210 nano-technology Porosity Absorption (electromagnetic radiation) |
| Zdroj: | Cellulose. |
| ISSN: | 1572-882X 0969-0239 |
| DOI: | 10.1007/s10570-021-03912-9 |
| Popis: | Tissue furnish optimization plays a key role in enhancing tissue properties, making the process cost-effective. Typically, this furnish is composed of a mixture of hardwood eucalyptus fibers (HW) and softwood (SW) fibers, which ensure strength and tissue machine runnability. However, the tissue paper production with the maximization of eucalyptus fibers achieves softer papers at less cost, since SW fibers are often more expensive than HW fibers. From this perspective, this study aims to investigate the effect of micro/nano-fibrillated cellulose (MFC/NFC) as an additive, on structural, softness, strength, and water absorption properties of tissue papers, promoting partial or total removal of SW fibers to produce 100% eucalyptus materials. MFC/NFC was characterized in terms of morphological, chemical, and water interaction properties. The results showed that MFC/NFC presents a high bonding surface area, high carboxyl group content and, when incorporated into tissue furnishes, it promotes strong inter-fiber bonds. This evidence was also supported by SEM image analysis methods and FTIR. Additionally, laboratory tissue handsheets with low basis weight were produced and used in the characterization assays. Overall, the results indicated that MFC/NFC improved strength, at the expense of bulk, porosity, softness, and absorption properties. Compared to typical industrial furnish mixtures (75%HW + 25%SW), MFC/NFC enhanced the production of bulkier, porous, and softer structures, but with reduced strength and absorption. It was possible to optimize the furnish composition by using fiber modeling to obtain 3D structure computation simulations with predictive capability. The MFC/NFC proved to be a high-quality additive to improve softness and strength properties. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full text from SpringerLink