Power Consumption Diagram for Wet Particle Kneader Mixers. In the Case that Rheological Properties for Wet Particles cannot be Measured
| Autor: | Meguru Kaminoyama, Kazuhiko Nishi, Yasuo Suzuki, Mitsuo Kamiwano |
|---|---|
| Rok vydání: | 2000 |
| Předmět: | |
| Zdroj: | JOURNAL OF CHEMICAL ENGINEERING OF JAPAN. 33:489-498 |
| ISSN: | 1881-1299 0021-9592 |
| DOI: | 10.1252/jcej.33.489 |
| Popis: | A method to draw power consumption diagrams (Np-Re diagram) for kneader mixers dealing with wet particles which have a high particle content and a flow curve showing plastic fluid characteristics are proposed. The method requires only power consumption measurement of kneader mixers. Rheological properties measured with a rheometer are unnecessary.The proposed method was developed based on Nagata’s method, which was designed to draw Np-Re diagrams using the Metzner-Otto concept for mixing vessels containing a low-particle content.For drawing Np-Re diagrams, we used Casson equations and the Metzner-Otto method to represent the relationship between apparent viscosities and shear rate. The procedure of the present method is as follows. Firstly Np-Re diagrams for Newtonian fluids are made. Secondly, mixing power consumption is measured for wet particles by varying rotational speeds. Then ratios of yield stresses to the specific equipment factor of the kneader mixer, τc/B, and Casson viscosity, μc, are estimated. Finally Np-Re diagrams can be obtained using corrected Bingham numbers and impeller Reynolds numbers based on Casson viscosities. Then, we ascertained that an Np-Re diagram is determined solely by Reynolds numbers based on apparent viscosities, and the Np-Re diagrams drawn by the method in this study are independent of the kind of wet particles and the scale-up ratio of the kneader mixer. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|