| Autor: |
Joško Krolo, Stjepan Lakušić, Domagoj Damjanović, Ivan Duvnjak, Ana Baričević, Dubravka Bjegović |
| Rok vydání: |
2012 |
| Předmět: |
|
| Zdroj: |
Concrete Repair, Rehabilitation and Retrofitting III ISBN: 9780429217173 |
| DOI: |
10.1201/b12750-33 |
| Popis: |
Previous investigations acknowledged that reinforcement of concrete with randomly distributed short fibres may improve the energy absorption during static and dynamic loading by comparison to ordinary concrete. This paper presents fibre-reinforced composite concrete, consisting of recycled steel fibres and recycled rubber in combination with industrial steel fibres. As a yield of tire recycling, steel fibres and rubber were obtained and used as by-products in composite concrete. Experimental investigation included six concrete mixtures with ratio of industrial to recycled fibres 100/0 %, 50/50 % and 0/100 %, with or without the addition of recycled rubber. Toughness and impact strength were investigated on the concrete elements consisting of various ratios of the industrial and recycled fibres with addition of recycled rubber particles. Fracture toughness test was performed on single edge notch bend specimen (SENB or three-point bend). During static loading crack opening and its increase was recorded continuously by means of two LVDT sensors. During impact testing hammer was dropped at the specimens from the specified height. Test configuration included force measurement with sampling frequency of 50 kHz. Test results include toughness, impact resistance and other important properties of fracture mechanics. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
