Mechanical characterization and tribological evaluation of ion-beam-assisted sputter coatings of carbon with nitrogen incorporation
Autor: | Koji Kato, Noritsugu Umehara, Dong F. Wang |
---|---|
Rok vydání: | 2000 |
Předmět: |
Materials science
Analytical chemistry chemistry.chemical_element Surfaces and Interfaces General Chemistry Nanoindentation engineering.material Condensed Matter Physics Nitrogen Surfaces Coatings and Films chemistry.chemical_compound Chemical engineering chemistry Coating Sputtering Physical vapor deposition Materials Chemistry engineering Ion beam-assisted deposition Carbon nitride Carbon |
Zdroj: | Surface and Coatings Technology. 123:177-184 |
ISSN: | 0257-8972 |
Popis: | Sputter coatings of carbon with nitrogen incorporation have been prepared by ion-beam-assisted deposition on Si(111) substrates. An amorphous structure with tiny crystals in the coating has been observed and confirmed by field-emission transmission electron microscopy. Analyses by X-ray photoelectron spectroscopy and secondary-ion mass spectrometry have revealed that the level of nitrogen incorporation is about 10%, and the composition distribution of both carbon and nitrogen atoms normal to the coating surfaces is homogeneous. A detailed Raman analysis has further shown that the proportion of sp 2 carbon bonds increases with the nitrogen acceleration energy. The influences of different nitrogen incorporation parameters and different coating thicknesses on the mechanical properties of carbon nitride coatings have been systematically characterized for the first time from the viewpoints of surface roughness, nanoindentation hardness and internal stress. Finally, the tribological properties of ion-beam-assisted carbon nitride coatings have also been evaluated in terms of nitrogen incorporation and coating thickness. |
Databáze: | OpenAIRE |
Externí odkaz: |