WITHDRAWN: Investigation on behavior of high-volume fly ash concrete made with fine aggregate replaced by steel slag
Autor: | S. Naveen Kumar, V. Karthik, V. Johnpaul, M. Natarajan |
---|---|
Rok vydání: | 2020 |
Předmět: |
010302 applied physics
Waste management business.industry Pulp (paper) Treatment method Waste material 02 engineering and technology engineering.material 021001 nanoscience & nanotechnology 01 natural sciences Steelmaking Industrial waste Construction industry Ground granulated blast-furnace slag Fly ash 0103 physical sciences engineering Environmental science 0210 nano-technology business |
Zdroj: | Materials Today: Proceedings. |
ISSN: | 2214-7853 |
DOI: | 10.1016/j.matpr.2020.10.514 |
Popis: | Now a days, preparation of concrete with conventional materials becomes more costlier due to the growing demand of construction materials. It will lead construction industry, to determine the alternative materials for the conventional without compromising the quality and quantity of construction. After numerous investigations, it is accepted that the preparation of concrete with alternative or industrial waste materials will be possible. In modern days, variety of industrial waste materials like fly ash, silica fumes, paper pulp, GGBFS, brick and quarry dust, etc., are disposed directly to the environment will causes various health, environmental and economic issues. So, it is necessary to effective disposal or treatment method, in order to reduce the above-mentioned social problems. Fly ash (FA) and waste steel slag (SS) are attempted to utilize an effective replacement material for the ingredient concrete. In this study, waste material from steel making industry was used as a partial replacement for fine aggregate (FIA) by varying replacement percentages from 0% to 60% at an interval of 10% in M30 grade high volume fly ash concrete (HVFAC) with different proportions of fly ash (40%, 50% and 60%). The behaviour of HVFAC was assessed by different strength properties at varying curing periods of 3, 7, 14, 28, 56 and 90 days. It is observed 50% replacement of steel slag shows better results when HVFAC was prepared with 40% fly ash, further increment of fly ash reduces the strength concrete irrespective of steel slag replacement percentage. |
Databáze: | OpenAIRE |
Externí odkaz: |