A facile route to fluoroalkylsiloxane polymers having resistance to corrosive acidic conditions: Synthesis and characterization
| Autor: | R.S. Rajeev, C. Gouri, K. N. Ninan, Ann Mathew, K. Indulekha |
|---|---|
| Rok vydání: | 2017 |
| Předmět: |
chemistry.chemical_classification
Materials science Polymers and Plastics Hydrosilylation Organic Chemistry Composite number General Physics and Astronomy 02 engineering and technology Polymer 010402 general chemistry 021001 nanoscience & nanotechnology 01 natural sciences 0104 chemical sciences Solvent Hexane Contact angle chemistry.chemical_compound chemistry Siloxane Polymer chemistry Materials Chemistry Adhesive 0210 nano-technology |
| Zdroj: | European Polymer Journal. 97:94-103 |
| ISSN: | 0014-3057 |
| DOI: | 10.1016/j.eurpolymj.2017.09.036 |
| Popis: | Polysiloxanes having 3,3,3-trifluoropropyl (TFP) groups attached to the silicon atom are highly attractive by virtue of their unique properties such as extreme solvent resistance and broad service temperatures. Though fluoroalkylsiloxane polymers are known for their resistance to hydrocarbon solvents and oils, reports on room temperature curable fluoroalkylsiloxane polymer based coatings that are resistant to corrosive acidic and oxidative environments are very rare. In this paper, for the first time, we report the synthesis of vinyl terminated fluorosilicone copolymer, poly(methyltrifluoropropyl-co-methylvinyl) siloxane (V-PFMVS) with very high TFP content (77 mol%) and 23 mol% vinyl content, and its comparison of properties with non-fluorinated counterpart, vinyl terminated poly(dimethyl-co-methylvinyl) siloxane (V-PDMVS). The synthesised copolymers were obtained in high yields of 70–75% with number average molecular weight (Mn) of 65,000 and were cured using cyclic hydridosiloxane via hydrosilylation route. Cured V-PFMVS exhibited increased hydrophobicity compared to cured V-PDMVS (contact angle 113° vs. 91°). The corresponding silica reinforced composites also were processed and evaluated for dynamic mechanical and thermal properties as well as response to various environments including hexane, conc. HNO3 and HF. Swelling studies proved the role of -CH2CH2CF3 groups in imparting excellent resistance to hexane and better resistance to corrosive acidic environments as illustrated by the low weight loss after exposure to conc. HNO3 and HF in the case of V-PFMVS/composite. Lap shear strength (LSS) evaluation on aluminium substrate proved its capability as a promising adhesive. The superior properties of the V-PFMVS/composite are correlated to its chemical composition. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect