Investigation of the process of double-sided friction welding with mixing of thick sheets of aluminum alloy 1565 chm
| Jazyk: | ruština |
|---|---|
| Rok vydání: | 2022 |
| Předmět: |
ÐлÑминиевÑе ÑплавÑ
double-sided friction welding with stirring research иÑÑледование Ð¼ÐµÑ Ð°Ð½Ð¸ÑеÑкие иÑпÑÑÐ°Ð½Ð¸Ñ ÑолÑÑÑе лиÑÑÑ ÑвойÑÑва двÑÑÑоÑонÑÑ ÑваÑка ÑÑением Ñ Ð¿ÐµÑемеÑиванием ÑÑÑÑкÑÑÑа mechanical tests properties СваÑка structure thick sheets |
| DOI: | 10.18720/spbpu/3/2022/vr/vr22-3857 |
| Popis: | Тема магиÑÑеÑÑкой диÑÑеÑÑаÑии: âÐÑÑледование пÑоÑеÑÑа двÑÑÑоÑонней ÑваÑки ÑÑением Ñ Ð¿ÐµÑемеÑиванием ÑолÑÑÑÑ Ð»Ð¸ÑÑов алÑминиевого Ñплава 1565Ñм". Рданной ÑабоÑе бÑли иÑÑÐ»ÐµÐ´Ð¾Ð²Ð°Ð½Ñ Ð¿ÑоÑеÑÑÑ Ð´Ð²ÑÑÑоÑонней ÑваÑки ÑÑением Ñ Ð¿ÐµÑемеÑиванием ÑолÑÑÑÑ Ð»Ð¸ÑÑов алÑминиевого Ñплава 1565Ñм. ÐÂ Ñ Ð¾Ð´Ðµ вÑÐ¿Ð¾Ð»Ð½ÐµÐ½Ð¸Ñ ÑабоÑÑ Ð±Ñло иÑполÑзовано Ñакое обоÑÑдование как, многоÑÑнкÑионалÑнÑй меÑаллообÑабаÑÑваÑÑий ÑенÑÑ Matec 40P, опÑиÑеÑкий микÑоÑкоп, микÑоÑвеÑÐ´Ð¾Ð¼ÐµÑ Zwick/Roell ZHU, а Ñакже ÑнивеÑÑалÑÐ½Ð°Ñ Ð¼Ð°Ñина Ð´Ð»Ñ Ð¼ÐµÑ Ð°Ð½Ð¸ÑеÑÐºÐ¸Ñ Ð¸ÑпÑÑаний Zwick/Roell Z100. ÐÑли оÑÑабоÑÐ°Ð½Ñ ÑÐµÐ¶Ð¸Ð¼Ñ ÑваÑки ÑÑением Ñ Ð¿ÐµÑемеÑиванием и меÑодом визÑалÑной оÑенки вÑбÑан опÑималÑнÑй Ñежим. ÐпиÑÐ°Ð½Ñ Ð¸ изÑÑÐµÐ½Ñ ÑезÑлÑÑаÑÑ Ð¸ÑÑледований, вÑполненнÑÑ Ñанее по подобной Ñеме. Ð ÑабоÑе бÑли опиÑÐ°Ð½Ñ Ð¸ÑполÑзÑемÑе в Ñ Ð¾Ð´Ðµ иÑÑÐ»ÐµÐ´Ð¾Ð²Ð°Ð½Ð¸Ñ Ð¼ÐµÑодÑ, иÑÑледÑемÑе маÑеÑÐ¸Ð°Ð»Ñ Ð¸ пÑоводимÑе ÑкÑпеÑименÑÑ, Ñакже иÑÑледовано влиÑние ÑазлиÑнÑÑ ÑакÑоÑов на Ñ Ð°ÑакÑеÑиÑÑики ÑваÑного ÑÐ¾ÐµÐ´Ð¸Ð½ÐµÐ½Ð¸Ñ Ð¸ ÑÐ´ÐµÐ»Ð°Ð½Ñ Ð½ÐµÐ¾Ð±Ñ Ð¾Ð´Ð¸Ð¼Ñе вÑÐ²Ð¾Ð´Ñ Ð¸ заклÑÑениÑ. The topic of the master's thesis: "Investigation of the process of double-sided friction welding with mixing of thick sheets of aluminum alloy 1565chmâ. In this work, the processes of double-sided friction welding with mixing of thick sheets of aluminum alloy 1565chm were investigated. In the course of the work, such equipment as the Matec 40P multifunctional metalworking center, an optical microscope, the Zwick/Roell ZHU microhardometer, as well as the Zwick/Roell Z100 universal mechanical testing machine were used. Friction stir welding modes were tested and the optimal mode was selected by visual assessment. The results of studies carried out earlier on a similar topic are described and studied. The paper describes the methods used in the course of the study, the materials studied and the experiments carried out, the influence of various factors on the characteristics of the welded joint was also investigated, the necessary conclusions and conclusions were made. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|