Range and Height Measurement of X-Band EM Propagation in the Marine Atmospheric Boundary Layer
| Autor: | Jonathan M. Pozderac, Denny P. Alappattu, Luyao Xu, Robert J. Burkholder, Qi Wang, Caglar Yardim, Qing Wang, Harindra J. S. Fernando, Adam J. Christman |
|---|---|
| Rok vydání: | 2019 |
| Předmět: |
Planetary boundary layer
Acoustics Monte Carlo method X band Inverse transform sampling 020206 networking & telecommunications 02 engineering and technology Atmospheric model 0202 electrical engineering electronic engineering information engineering Errors-in-variables models Atmospheric duct Duct (flow) Electrical and Electronic Engineering Geology |
| Zdroj: | IEEE Transactions on Antennas and Propagation. 67:2063-2073 |
| ISSN: | 1558-2221 0018-926X |
| DOI: | 10.1109/tap.2019.2894269 |
| Popis: | An X-band vertical array system is developed for measuring and characterizing electromagnetic (EM) propagation in the marine atmospheric boundary layer. In particular, the evaporation duct that commonly forms over water is investigated as part of the Coupled Air-Sea Processes and Electromagnetic ducting Research (CASPER) at-sea experimental campaign conducted off the coast of Duck, NC, USA, during October–November of 2015. Monte Carlo simulations are first used to develop an optimal array of four vertically spaced receiving antennas. In the experiment, the antennas are mounted on the stern A-frame of a research vessel and measure EM signals transmitted from beacons mounted on another research vessel and on the pier at the Army Field Research Facility. While the propagation loss versus range provides a data set similar to previous work, the vertical array can provide sampling of modes in the leaky waveguide formed in the duct. Combining both the range and height sampling results in a robust inversion method for evaporation duct estimation. In this paper, the efficacy of the four-element array is demonstrated by estimation of the evaporation duct height through comparison with a library of precomputed propagation curves generated using the parabolic wave equation. Low model error gives confidence in the estimates, which are consistent with the concurrent environmental measurements performed by the CASPER team. It is found that the evaporation duct can vary significantly with range and time over the duration of a data collection run. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|