Service of chamotte and high-alumina brick in blast-furnace stack

Autor:	I. I. Sagaydak, I. M. Galemin, L. A. Lepikhin
Rok vydání:	1962
Předmět:	Blast furnace Brick Materials science Grog Waste management Metallurgy Abrasive Slag Cracking Stack (abstract data type) visual_art Ceramics and Composites Materials Chemistry visual_art.visual_art_medium Brickwork
Zdroj:	Refractories. 3:307-311
ISSN:	1573-9139 0034-3102
Popis:	Destruction of refractory brickwork in the top of the blast furnace stacks at the Magnitogorsk Metal Works is restricted on account of the relatively low temperatures of the medium and occurs mainly through the abrasive effect of the blast charge and the gas stream. The absence of hardened slag on the brickwork in the middle of the stack and the high temperature of the medium have an effect on the extensive wear and tear of the lining subjected to the abrasive gas stream. The wear becomes worse on account of the deposition of zinc, alkalies and carbon soot on the brickwork. Reasons for cracking and striation of refractory brick should be studied. In the bottom area of the stack the high-alumina brick showed the same strength as other types of lining materials. However, since the properties of this brick after service (density, strength, etc.) were practically the same, further tests should be carried out in the middle section of blast-furnace stacks.
Databáze:	OpenAIRE
Externí odkaz:	https://explore.openaire.eu/search/publication?articleId=doi_________::6dcd0fd9ec4ba80ba7856932b237fef5 https://doi.org/10.1007/bf01342800 Zobrazit plný text záznamu Full text from SpringerLink