Effects of microstructural heterogeneity on fatigue properties of cast aluminum alloys
| Autor: | Shengchuan Wu, Shaopu Yang, Ma Shiqing, Zhang Yifan, Deli Sang, Yongqiang Liu, Yinan Jiao, Jinjin Zhao, Yang Zhang |
|---|---|
| Rok vydání: | 2020 |
| Předmět: |
education.field_of_study
Materials science Population technology industry and agriculture Metals and Alloys General Engineering Intermetallic 02 engineering and technology 021001 nanoscience & nanotechnology Microstructure Fatigue limit Stress (mechanics) Stress field 020303 mechanical engineering & transports 0203 mechanical engineering Composite material 0210 nano-technology education Eutectic system Shrinkage |
| Zdroj: | Journal of Central South University. 27:674-697 |
| ISSN: | 2227-5223 2095-2899 |
| Popis: | Cast Al alloys are widely employed for engine components, structural parts, gear box, chassis, etc. and subjected to mechanical cyclic load during operation. The accurate fatigue life prediction of these alloys is essential for normal operation as fatigue cracks initiated during operation induce the lubrication oil leak and serious safety hazard. Microstructural heterogeneity, including shrinkage/gaspores and secondary phase particles, is the most detrimental factor that affects fatigue life of cast Al alloys. The approximate fatigue life cycles could be estimated based on the size distribution and locations of shrinkage pores/defects. The relationship between crack population and stress was reported by statistical distributions and the cumulative probability for cast Al alloys fail at a certain stress could be predicted by combination of Paris law and pore size distribution. Pore depth was found to dominate the stress field around the pore on the surface and the maximum stress increases sharply when the pore intercepted with the surface at its top. The microstructure of cast Al alloys usually is composed of primary Al dendrites, eutectic silicon, Fe-rich particles and other intermetallic particles are dependent upon alloy composition and heat treatment. The coalescence of microcracks initiated from the fractured secondary phases was clearly found and can accelerate the initiation and propagation of the fatigue cracks. A link between defect features and the fatigue strength needs to be established through a good understanding of the fatigue damage mechanisms associated with the microstructural features under specific loading conditions. This paper reviews the influences of shrinkage/gaspores and secondary phase particles, formed during casting process, on the fatigue life of Al-Si-Mg cast Al alloys. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full text from SpringerLink