Electrocatalytic properties of spinel-type MnxFe3 –xO4synthesized below 100 °C for oxygen evolution in KOH solutions

Autor:	K. L. Anitha, Nripat Singh, Ravindra N. Singh, Shashi Kant Tiwari
Rok vydání:	1996
Předmět:	Reaction mechanism Tafel equation Chemistry Spinel Inorganic chemistry Oxygen evolution chemistry.chemical_element engineering.material Electrochemistry Oxygen Electrode engineering Ferrite (magnet) Physical and Theoretical Chemistry
Zdroj:	J. Chem. Soc., Faraday Trans.. 92:2397-2400
ISSN:	1364-5455 0956-5000
DOI:	10.1039/ft9969202397
Popis:	Some spinel ferrites (MnxFe3 –xO4; x= 0, 0.5, 1.0, 1.5) have been synthesized at 70 °C by the method of precipitation, for electrochemical characterization as oxygen anodes. The electrodes were prepared as films on a nickel substrate by painting with an oxide-slurry, followed by sintering at 400 °C. The electrocatalytic activity for O2 evolution was found to be a maximum with the MnFe2O4 electrode. Based on the observed current density at 0.625 V, the activity of MnFe2O4 was 20 times higher than that of Fe3O4. The reaction followed approximately second-order kinetics in [OH–] at the pure and manganese-substituted ferrite film electrodes. The Tafel slope values were ca. RT/F on Fe3O4 and Mn0.5Fe2.5O4 and ca. 2RT/3F on MnFe2O4 and Mn1.5Fe1.5O4. Based on the electrode kinetic results, a reaction mechanism for oxygen evolution is suggested.
Databáze:	OpenAIRE
Externí odkaz:	https://explore.openaire.eu/search/publication?articleId=doi_________::6b05c386c0a3b806b72d49e32dd38fbc https://doi.org/10.1039/ft9969202397 Zobrazit plný text záznamu