| Autor: |
Lucian Capitanu, Liliana-Laura Badita, Constantin Tiganesteanu, Virgil Florescu |
| Rok vydání: |
2021 |
| Předmět: |
|
| Zdroj: |
Industrial Lubrication and Tribology. 74:385-391 |
| ISSN: |
0036-8792 |
| DOI: |
10.1108/ilt-08-2021-0320 |
| Popis: |
Purpose The purpose of this paper is to study the roughness effect on the fixation of taper junction components and surfaces wear in terms of taper surface design. The roughness of the femoral heads’ taper and of the femoral stems’ trunnions can influence the fretting wear of the taper junction. Design/methodology/approach It was analysed whether a microgrooved taper surface of the femoral stem trunnion improves the fixation and reduces the wear rate at the taper junction of the hip prosthesis. Two models have studied: a femoral head with a smooth tapered surface combined with a microgrooved stem trunnion and a femoral head with a smooth tapered surface combined with a trunnion that had a smooth surface of the tapered. To compare the wear evolution between these two models, a computerised finite element model of the wear was used. Findings The results obtained after analysis carried out during millions of loading cycles showed that the depth of the linear wear and the total material loss were higher for the femoral heads joined with microgrooved trunnions. The main conclusion of this paper is that the smooth surfaces of the taper and of the trunnions will ensure a better fixation at the taper junction, and therefore, will reduce the volumetric wear rates. Originality/value A higher fixation of the taper junction will reduce the total hip prosthesis failure and, finally, it will improve the quality and durability of modular hip prostheses. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
