Propagation, proppant transport and the evolution of transport properties of hydraulic fractures
| Autor: | Martin K. Denison, Jiehao Wang, Derek Elsworth |
|---|---|
| Rok vydání: | 2018 |
| Předmět: |
Materials science
Mechanical Engineering 0211 other engineering and technologies Well stimulation 02 engineering and technology Condensed Matter Physics Fluid transport Hagen–Poiseuille equation 020501 mining & metallurgy Permeability (earth sciences) Hydraulic fracturing 0205 materials engineering Rheology Flexural strength Settling Mechanics of Materials Composite material 021101 geological & geomatics engineering |
| Zdroj: | Journal of Fluid Mechanics. 855:503-534 |
| ISSN: | 1469-7645 0022-1120 |
| DOI: | 10.1017/jfm.2018.670 |
| Popis: | Hydraulic fracturing is a widely used method for well stimulation to enhance hydrocarbon recovery. Permeability, or fluid conductivity, of the hydraulic fracture is a key parameter to determine the fluid production rate, and is principally conditioned by fracture geometry and the distribution of the encased proppant. A numerical model is developed to describe proppant transport within a propagating blade-shaped fracture towards defining the fracture conductivity and reservoir production after fracture closure. Fracture propagation is formulated based on the PKN-formalism coupled with advective transport of an equivalent slurry representing a proppant-laden fluid. Empirical constitutive relations are incorporated to define rheology of the slurry, proppant transport with bulk slurry flow, proppant gravitational settling, and finally the transition from Poiseuille (fracture) flow to Darcy (proppant pack) flow. At the maximum extent of the fluid-driven fracture, as driving pressure is released, a fracture closure model is employed to follow the evolution of fracture conductivity with the decreasing fluid pressure. This model is capable of accommodating the mechanical response of the proppant pack, fracture closure of potentially contacting rough surfaces, proppant embedment into fracture walls, and most importantly flexural displacement of the unsupported spans of the fracture. Results show that reduced fluid viscosity increases the length of the resulting fracture, while rapid leak-off decreases it, with both characteristics minimizing fracture width over converse conditions. Proppant density and size do not significantly influence fracture propagation. Proppant settling ensues throughout fracture advance, and is accelerated by a lower viscosity fluid or greater proppant density or size, resulting in accumulation of a proppant bed at the fracture base. ‘Screen-out’ of proppant at the fracture tip can occur where the fracture aperture is only several times the diameter of the individual proppant particles. After fracture closure, proppant packs comprising larger particles exhibit higher conductivity. More importantly, high-conductivity flow channels are necessarily formed around proppant banks due to the flexural displacement of the fracture walls, which offer preferential flow pathways and significantly influence the distribution of fluid transport. Higher compacting stresses are observed around the edge of proppant banks, resulting in greater depths of proppant embedment into the fracture walls and/or an increased potential for proppant crushing. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|