The effect of welding parameters on surface quality of AA6351 aluminium alloy
| Autor: | A. Mahyuddin, NS M Roji, M H Zakaria, Shaiful Anuar Ismail, Qumrul Ahsan, S. Yacob, M I Yusof, N Ariffin, M A MAli, R Roslan, M I A Wahab, M N Hamzah, R. Ali, A. Arshad, W B W Din, Allina Abdullah, K Z Kamarulzaman |
|---|---|
| Rok vydání: | 2015 |
| Předmět: | |
| Zdroj: | IOP Conference Series: Materials Science and Engineering. 100:012038 |
| ISSN: | 1757-899X 1757-8981 |
| DOI: | 10.1088/1757-899x/100/1/012038 |
| Popis: | In the present work, the effects of gas metal arc welding-cold metal transfer (GMAW-CMT) parameters on surface roughness are experimentally assessed. The purpose of this study is to develop a better understanding of the effects of welding speed, material thickness and contact tip to work distance on the surface roughness. Experiments are conducted using single pass gas metal arc welding-cold metal transfer (GMAW-CMT) welding technique to join the material. The material used in this experiment was AA6351 aluminum alloy with the thickness of 5mm and 6mm. A Mahr Marsuft XR 20 machine was used to measure the average roughness (Ra) of AA6351 joints. The main and interaction effect analysis was carried out to identify process parameters that affect the surface roughness. The results show that all the input process parameters affect the surface roughness of AA6351 joints. Additionally, the average roughness (Ra) results also show a decreasing trend with increased of welding speed. It is proven that gas metal arc welding-cold metal transfer (GMAW-CMT)welding process has been successful in term of providing weld joint of good surface quality for AA6351 based on the low value surface roughness condition obtained in this setup. The outcome of this experimental shall be valuable for future fabrication process in order to obtained high good quality weld. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|