Optimization in Autoclave Process to Produce Durable Aluminium Composite

Autor:	Handoko Subawi
Rok vydání:	2011
Předmět:	Materials science Adhesive bonding Bond strength Bond Adhesive Process variable Composite material Failure mode and effects analysis Durability Curing (chemistry)
Zdroj:	Materials Sciences and Applications. :458-464
ISSN:	2153-1188 2153-117X
DOI:	10.4236/msa.2011.25061
Popis:	The purpose of this paper is to characterize adhesive bonding performance through the fracture evaluation. Failure modes correlate to the bond strength, in which the weak bond of adhesion will be considered unacceptable in the aircraft manufacture certification, whereas the cohesion bond as strong as adhesive itself is preferably accepted. The final quality of adhesive bonding process depends on several key variables during manufacturing. A good anodizing treatment is properly maintained in order to eliminate possible bond failures in the long term bond durability in service. This paper described the method to improve an adhesive joining for durable bonds through optimizing the process variable during autoclave curing. The process simulation utilized the drum peel test to describe the cohesive fracture phenomenon in which applicable on a daily load basis in commercial application.
Databáze:	OpenAIRE
Externí odkaz:	https://explore.openaire.eu/search/publication?articleId=doi_________::69a2f26e2156c8efb150d161166c1323 https://doi.org/10.4236/msa.2011.25061 Zobrazit plný text záznamu