Influences of hydrogen and various gas fuel addition to different liquid fuels on the performance characteristics of a spark ignition engine
| Autor: | Bahri Sahin, Guven Gonca, Mehmet Fatih Hocaoğlu |
|---|---|
| Rok vydání: | 2022 |
| Předmět: |
Thermal efficiency
Materials science Renewable Energy Sustainability and the Environment Energy Engineering and Power Technology Condensed Matter Physics Combustion chemistry.chemical_compound Fuel Technology Chemical engineering Mean effective pressure chemistry Fuel gas Propane Spark-ignition engine Exergy efficiency Gasoline |
| Zdroj: | International Journal of Hydrogen Energy. 47:12421-12431 |
| ISSN: | 0360-3199 |
| DOI: | 10.1016/j.ijhydene.2021.09.029 |
| Popis: | This study reports the impacts of dual fuel mixtures on the theoretical performance characteristics of a spark ignition engine (SIE). The effects of addition of liquefied hydrogen, methane, butane, propane (additive fuels) into gasoline, iso-octane, benzene, toluene, hexane, ethanol and methanol fuels (primary fuels) on the variation of power, indicated mean effective pressure (IMEP), thermal efficiency, exergy efficiency, were examined by using a combustion model. The fuel additives were ranged from 10 to 50% by mass. The results exhibited that the ratios of hydrogen, methane, butane, propane noticeably affect the performance of the engine. The maximum increase ratio of power is 82.59% with 50% of toluene ratio and its maximum decrease ratio is 10.84% with 50% of methanol ratio in hydrogen mixtures. The maximum increase ratio of thermal efficiency and exergy efficiency are observed as 26.75% and 32.23% with the combustion of benzene-hydrogen mixtures. The maximum decrease ratio of thermal efficiency is 29.71% with the combustion of 50% of methanol ratio and it is 21.95% for the exergy efficieny with the combustion of 50% of ethanol ratio in hydrogen mixtures. The power, IMEP, thermal efficiency and exergy efficiency of primary fuels demonstrate different variation characteristics with respect to type and ratio of additive fuels. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect