Electroplating/electrodissolution/recovery cycle for rhodium target used for an industrial scale cyclotron production of palladium-l03
Autor: | Hossein Afarideh, Gholamreza Raisali, Mahdi Sadeghi, P. Van den Winkel |
---|---|
Rok vydání: | 2006 |
Předmět: | |
Zdroj: | Radiochimica Acta. 94:217-221 |
ISSN: | 2193-3405 0033-8230 |
DOI: | 10.1524/ract.2006.94.4.217 |
Popis: | Summary Electrodeposition of rhodium metal on a copper backing was performed in acidic sulfate media using RhCl3 · 3 H2O, Rh2(SO4)3 (recovered from hydrochloric acid solution) and also the commercially available Rhodex plating baths. This work describes the development of a high current density (2.4 A·cm-2) electrodissolution system that allows solubilisation of rhodium fragments, powder and pieces of foils and wires in the presence of hydrochloric and chlorine gas. Solvent-solvent extraction of no-carrier-added 103Pd from the irradiated rhodium target with a-furyldioxime into chloroform under the influence of hydrochloric acid concentration was investigated. The extraction yield was 85.3% for a single extraction with 0.37 M HCl, and 103Pd was more than 99% pure. |
Databáze: | OpenAIRE |
Externí odkaz: |