Band-notched ultra-wideband bandpass filter design using multiple-mode resonator and stepped impedance stub loaded
| Autor: | M'Hamed Boulakroune, Mouloud Challal, Hassiba Louazene |
|---|---|
| Rok vydání: | 2017 |
| Předmět: |
Materials science
Acoustics 020208 electrical & electronic engineering Bandwidth (signal processing) 020206 networking & telecommunications 02 engineering and technology Stub (electronics) Resonator Filter design Band-pass filter 0202 electrical engineering electronic engineering information engineering Return loss Insertion loss Passband |
| Zdroj: | 2017 5th International Conference on Electrical Engineering - Boumerdes (ICEE-B). |
| DOI: | 10.1109/icee-b.2017.8192151 |
| Popis: | A novel ultra-wideband (UWB) bandpass filter (BPF) with notched band is proposed in this paper. The filter is consisting of two symmetrical multiple-mode resonators (MMRs) connected to quarter-wavelength interdigital lines. This filter provides, in the passband, an insertion loss of 0.19 dB and a return loss greater than 22.6 dB. Furthermore, the filter occupies an area of 11.54 × 3.11 mm2. In this filter design, besides obtaining a uniform in-band transmission response, a notch band centered roughly 5.2 GHz is created by modifying one of two arms in the coupled-line sections. The simulation results are in satisfactory agreement with the measurement ones reported elsewhere. The proposed UWB-BPF presents good performance in terms of insertion loss, return loss, fractional bandwidth and compact size than those reported in the literature. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|