Enhancing pitting corrosion resistance of AlxCrFe1.5MnNi0.5 high-entropy alloys by anodic treatment in sulfuric acid
| Autor: | Jien-Wei Yeh, Ching-Tung Hsu, Chiun-Peng Lee, Yeh-Cheng Chen, H.C. Shih |
|---|---|
| Rok vydání: | 2008 |
| Předmět: |
Materials science
Anodizing High entropy alloys Alloy Metallurgy Metals and Alloys chemistry.chemical_element Sulfuric acid Surfaces and Interfaces engineering.material Surfaces Coatings and Films Electronic Optical and Magnetic Materials Corrosion chemistry.chemical_compound chemistry X-ray photoelectron spectroscopy Aluminium Materials Chemistry engineering Pitting corrosion |
| Zdroj: | Thin Solid Films. 517:1301-1305 |
| ISSN: | 0040-6090 |
| Popis: | High-entropy alloys are a newly developed family of multi-component alloys that comprise various major alloying elements. Each element in the alloy system is present in between 5 and 35 at.%. The crystal structures and physical properties of high-entropy alloys differ completely from those of conventional alloys. The electrochemical impedance spectra (EIS) of the AlxCrFe1.5MnNi0.5 (x = 0, 0.3, 0.5) alloys, obtained in 0.1 M HCl solution, clearly revealed that the corrosion resistance values were determined to increase from 21 to 34 Ωcm2 as the aluminum content increased from 0 to 0.5 mol, and were markedly lower than that of 304 stainless steel (243 Ωcm2). At passive potential, the corresponding current declined with the anodizing time accounting, causing passivity by the growth of the multi-component anodized film in H2SO4 solution. X-ray photoelectron spectroscopy (XPS) analyses revealed that the surface of anodized Al0.3CrFe1.5MnNi0.5 alloy formed aluminum and chromium oxide film which was the main passivating compound on the alloy. This anodic treatment increased the corrosion resistance in the EIS measurements of the CrFe1.5MnNi0.5 and Al0.3CrFe1.5MnNi0.5 alloys by two orders of magnitude. Accordingly, the anodic treatment of the AlxCrFe1.5MnNi0.5 alloys optimized their surface structures and minimized their susceptibility to pitting corrosion. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect