| Autor: |
Hiroshi Matsuoka, Akinori Yui, Shigeki Okuyama, Go Okahata, Takayuki Kitajima |
| Rok vydání: |
2011 |
| Předmět: |
|
| Zdroj: |
Advanced Materials Research. 325:159-164 |
| ISSN: |
1662-8985 |
| DOI: |
10.4028/www.scientific.net/amr.325.159 |
| Popis: |
Rubbing tests between a diamond stick and a tungsten carbide plate and planing experiments of cobalt-free tungsten carbide using a mono-crystalline diamond tool are conducted, and the effect of lubricants on tool wear is investigated. Five kinds of lubricants such as: sulfur-base extreme-pressure additive; dimethyl-silicone; oleic acid; zinc dialkyldithiophosphate (ZnDDP); and chemical solution type coolant (FGC950) are chosen for the lubricants. Through the rubbing experiments, diamond stick wear is the greatest when using dimethyl-silicone, followed by FGC950 and it is the least using ZnDDP. On the other hand, tool edge chipping is the greatest when using FGC950, followed by sulfur-base extreme-pressure additive and it is the least using ZnDDP. Through the planing experiments, tool chipping is dominant in diamond-tool wastage in comparison with abrasive wear. Tool life is the longest when using ZnDDP and obtained surface roughness is 0.022 mm Ra after 177 m planing. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
