Evaluation of Microstructure and Mechanical Properties for Friction Stir Welding of Aluminium HE-30 Plates
| Autor: | B. Rajkumar, A.K. Revelly, V. Swapna |
|---|---|
| Rok vydání: | 2019 |
| Předmět: |
010302 applied physics
Materials science business.industry Mechanical Engineering Metallurgy chemistry.chemical_element 02 engineering and technology 021001 nanoscience & nanotechnology Condensed Matter Physics Microstructure 01 natural sciences chemistry Mechanics of Materials Aluminium Nondestructive testing 0103 physical sciences Friction stir welding General Materials Science 0210 nano-technology business |
| Zdroj: | Materials Science Forum. 969:720-726 |
| ISSN: | 1662-9752 |
| DOI: | 10.4028/www.scientific.net/msf.969.720 |
| Popis: | The main aim of the present topic is friction stir welding (FSW) of Aluminium HE-30, which shows that improved microstructures, strong weld and with less of defects. In the other hand, an attempt was made to correlate the welding parameters and mechanical properties. In the present investigation four rotational speeds of 1000 rpm, 1200 rpm, 1400 rpm and 1600 rpm with travelling speed of 30 mm/min. and tool geometry (straight cylindrical) was chosen. It was observed that the tool rotational speed is a sensitive parameter to decide the ultimate tensile strength and yield strength of the present material. Similarly, the hardness of Al plates is improved at the weld zone. Hence, it is suggested that to consider a parameter such as welding tool rotational speed, travelling speed and materials in selecting the welding methods of sound joints, because it influences the microstructure and mechanical properties in various applications. In the present study, non-destructive tests are also confirmed the defective nature of the weld zone of Al plates. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|