METHOD OF CONTROLLING PRESENCE OF FOREIGN SUBSTANCES AND OBJECTS IN THE BORE OF THE BARREL USING MONOCHROME LIGHT

Autor: V. Kozachuk, M. Sliusarenko
Rok vydání: 2021
Zdroj: Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки. :53-57
ISSN: 2706-7386
DOI: 10.37701/dndivsovt.9.2021.07
Popis: In the article, the authors propose a method for controlling the presence of foreign substances and objects inside the barrel. The problem of surface cleanliness control remains relevant in many areas, ranging from sanitary cleaning to nanoelectronics. In the military sphere, this becomes particularly important during the cleaning of cannon barrels. Both powder combustion products and cartridge cap and bullet shell particles are deposited in the barrel during firing from guns. Under the impact of high temperatures, the bullet particles are partially oxidized and cover the barrel channel with a thin layer of deposit of oxides, which are difficult to dissolve. As a result, the density of the bullet abuting the walls changes. This affects the characteristics of its motion inside the barrel. The accuracy of the shot is reduced, and subsequently the precision and accuracy of shooting in general decreases. The essence of the proposed method consists in the fact that a light source is placed in the bore of the barrel on one side, and an optical device is placed on the other side, with the help of which the presence of foreign substances and objects is monitored. Unlike the known methods, this method is characterized in that several monochrome light sources in addition are placed in turn in the bore of the barrel from the breech part, and in the bore of the barrel from the muzzle part there is equipment for receiving (detecting) monochrome light. Then, obtained monochrome light is analyzed, current value of its defined parameters is determined. At the next stage, parameter values of monochrome light fixed during control are compared with parameter values of reference signatures, which had been obtained before the barrel was put in service. These values are stored in equipment memory. If the values of at least one of the parameters from at least one of the monochrome light sources are found to be inconsistent with the parameters of the reference signatures, the equipment for receiving and analyzing monochrome light gives a signal about the presence of foreign substances and objects in the bore of the barrel.
Databáze: OpenAIRE