| Autor: |
S.V. Khovrich, D.G. Malykhin, R.L. Vasilenko, A. A. Vasil’ev, P.I. Stoyev, O. V. Trembach, K.V. Kovtun, S.P. Stetsenko |
| Rok vydání: |
2020 |
| Předmět: |
|
| Zdroj: |
Problems of Atomic Science and Technology. :230-235 |
| Popis: |
Studies were made into the effect of severe plastic deformation on the mechanical properties, structure, and texture of high-purity cast beryllium. For the first time, angular pressing of high-purity cast beryllium was carried out at temperatures of 600 and 500 °C. It is shown that the degree of grain refinement during angular pressing into a strip reaches a significant value. In a single deformation cycle, the grain is crushed from 3 mm down to 10 μm. Temperature dependences of the mechanical properties of the material of extruded billets in the initial state and after recrystallization annealing at a temperature of 650 °C for one hour were studied. It has been established that the best mechanical properties are shown by the samples of material deformed at 600 °C with subsequent annealing at 650 °C for an hour. |
| Databáze: |
OpenAIRE |
| Externí odkaz: |
|
