Cementation Exponents in Middle Eastern Carbonate Reservoirs
| Autor: | D. Munn, J.W. Focke |
|---|---|
| Rok vydání: | 1987 |
| Předmět: | |
| Zdroj: | SPE Formation Evaluation. 2:155-167 |
| ISSN: | 2469-8512 0885-923X |
| DOI: | 10.2118/13735-pa |
| Popis: | Summary The cementation exponent, m, is a major factor of uncertainty in the calculation of hydrocarbon/ water saturation in heterogeneous carbonate reservoirs. Hydrocarbon saturations as high as 70 or 80%, calculated with the conventional value m = 2, may disappear completely with m values of 3 and 4 (Fig. 1), which are quite common in carbonate rocks. Laboratory data obtained in heterogeneous carbonate reservoirs often show a wide scatter (Fig. 2). Constant (average) m values are usually used in spite of such scatter, and data points with m values much higher than the average value are often rejected to obtain straight-line trends. This paper presents the results of a study of the relationship between variable m values measured on core plugs and detailed carbonate rock types. The scatter in the data is analyzed in terms of rock type. We conclude that the high m values are often representative for specific rock types and that these values should not be rejected but applied selectively in log analysis over those intervals where these rock types occur. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|