Tribological properties of boronized ferrous based PM journal bearings

Autor:	Selim Sarper Yilmaz, Naci Kurgan, Remzi Varol, Bekir Sadık Ünlü
Rok vydání:	2015
Předmět:	Materials science Mechanics of Materials Mechanical Engineering Metallurgy Adhesive wear General Materials Science Tribology Ferrous
Zdroj:	Materials Testing. 57:259-266
ISSN:	2195-8572 0025-5300
DOI:	10.3139/120.110700
Popis:	Ferrous based PM (powder metallurgical) materials are widely used in journal bearings since they provide a good tribological performance. These bearings are self-lubricating and can be used in places where lubricating is not possible. This also applies to the shaft material which shows adhesive wear. Tribological properties can be improved and adhesive wear can be decreased by boronizing. In this study, tribological properties of ferrous based boronized and non-boronized Fe-graphite, FeCu-graphite and CuSnFe-graphite bearings manufactured by PM method have been determined and compared. Boronizing treatment was carried out at 950° C for 4 hours. The SAE 1050 steel shaft was used as counter abrader. Experiments were carried out at 20 N loads and 1500 rpm every 30 minutes for 2.5 hours.
Databáze:	OpenAIRE
Externí odkaz:	https://explore.openaire.eu/search/publication?articleId=doi_________::63622d44b4b062d144cf6eb80a4ff5db https://doi.org/10.3139/120.110700 Zobrazit plný text záznamu