Drop evaporation of hydrocarbon fluids with deposit formation
Autor: | Bernhard Voß, Achim Bender, Philipp Hänichen, Peter Stephan, Tatiana Gambaryan-Roisman |
---|---|
Rok vydání: | 2019 |
Předmět: |
Fluid Flow and Transfer Processes
chemistry.chemical_classification Materials science Atmospheric pressure Mechanical Engineering Drop (liquid) chemistry.chemical_element 02 engineering and technology 021001 nanoscience & nanotechnology Condensed Matter Physics 01 natural sciences 010305 fluids & plasmas Contact angle Hydrocarbon chemistry Aluminium 0103 physical sciences Composite material 0210 nano-technology |
Zdroj: | International Journal of Heat and Mass Transfer. 128:115-124 |
ISSN: | 0017-9310 |
DOI: | 10.1016/j.ijheatmasstransfer.2018.08.102 |
Popis: | The evaporation and deposit formation process of a hydrocarbon drop on a heated aluminium surface is experimentally investigated and compared to a physico-mathematical model. To analyze the effect of wall temperature on deposit formation, the experiments are conducted for three substrate temperatures below, one temperature close to and one temperature above the saturation point for atmospheric pressure. In each experimental run 500 single drops with constant volume are deposited and evaporated successively. The shape evolution of the drops is recorded with a monochrome camera sidewards. The deposited mass is evaluated as well as the contact angle evolution and drop lifetime. The experiments show a strong dependency of the contact angle on the deposit formation and on the wall temperature. With higher wall temperatures and an ongoing deposit formation, the initial contact angles increase and drop lifetime is reduced. The appearing deposits vary from light yellow and highly viscous films to dark brown solid layers and black particles, depending on the applied substrate temperatures. The model based calculations show a possibility to describe the evaporation process with effective diffusive transport. |
Databáze: | OpenAIRE |
Externí odkaz: |