Optimization of the main parameters of a mixing box in a periodic mode of operation in the preparation of liquid lumps in animal husbandry
| Autor: | P N Solonshickov |
|---|---|
| Rok vydání: | 2022 |
| Zdroj: | IOP Conference Series: Earth and Environmental Science. 981:042027 |
| ISSN: | 1755-1315 1755-1307 |
| DOI: | 10.1088/1755-1315/981/4/042027 |
| Popis: | The article discusses the problem of developing means that can increase the efficiency of mechanization of the process of preparing liquid feed in animal husbandry. Design bureaus, research and technological institutes for mechanization and electrification of agriculture have developed new progressive technologies, as well as kits, units, machines and apparatus for animal husbandry and fodder production. On the basis of this technique, complex mechanization of farms is being introduced and livestock complexes with industrial production technology are being created. But recently, the widespread use of domestic machines for the preparation of liquid feed mixtures has not been presented. Therefore, an experimental setup is proposed that combines three functions: a batcher, a pump and a mixer, which ultimately allows to obtain a mixture of good quality. The article provides a program and research methodology for the installation. For this, a special stand has been developed, which makes it possible to determine the parameters of the mixture quality. As a search for the optimal combination of factors for the optimization criteria: the degree of homogeneity and, plan 33 was chosen. Experimental studies have shown the range of the installation feed at different speeds of rotation of the impeller shaft. Mixing studies have confirmed the effectiveness of the design of the plant and its components: dispenser, pump and mixer. With the help of experimental planning methods, the main factors influencing the mixing process are identified, and the optimal parameters of the mixture quality are determined. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|