An alternative approach to measure alpha-particle-induced SEU cross-section for flip-chip packaged SRAM devices: High energy alpha backside irradiation
| Autor: | Chulseung Lim, Geunyong Bak, Soonyoung Lee, Saqib Ali Khan, Sanghyeon Baeg |
|---|---|
| Rok vydání: | 2017 |
| Předmět: |
010302 applied physics
Materials science Silicon 010308 nuclear & particles physics business.industry Monte Carlo method Electrical engineering chemistry.chemical_element Alpha particle Condensed Matter Physics Chip 01 natural sciences Atomic and Molecular Physics and Optics Surfaces Coatings and Films Electronic Optical and Magnetic Materials Ion chemistry 0103 physical sciences Optoelectronics Irradiation Static random-access memory Electrical and Electronic Engineering Safety Risk Reliability and Quality business Flip chip |
| Zdroj: | Microelectronics Reliability. 69:100-108 |
| ISSN: | 0026-2714 |
| DOI: | 10.1016/j.microrel.2016.12.004 |
| Popis: | To evaluate a device sensitivity against alpha particles, traditional Single Event Effect (SEE) tests are conducted using isotope source, which emits particles just above 5 MeV. Relentless downscaling and higher packing density have driven the demand of developing increasingly complex packaging: smaller, thinner, having enormous input/output pins count per chip. Flip-chip bonded devices meet all these demands, but their testing against alpha particles is a big challenge. The range of alpha ions, emitted by the isotope sources, is very short, which precludes their penetration till active circuit – from either side of the chip. This paper presents an evidence that high energy alpha irradiation can potentially be used to measure and correlate alpha SEE cross-section for such devices. The proposed method uses high energy alpha particles, directed from the backside of die, to mimic low energy (~ 5 MeV) at the sensitive volume (SV). The incident particles penetrate the entire silicon substrate and deposit charge in the SV to induce upsets. The energy and LET of an ion at the SV, having traversed the entire substrate, is determined using TRIM. SEE experiments are performed on 14 nm FinFET SRAM devices, assembled in flip-chip and wire-bonded structures, respectively, for backside and traditional top-side testing. High energy alpha irradiations were simulated using CREME-MC – a Geant4 based Monte Carlo transport code. Tests and simulation results, for traditional and proposed methods, are presented for correlation. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Full Text from ScienceDirect