Application of the Aquifer Impact Model to support decisions at a CO 2 sequestration site
| Autor: | Bracken T. Wimmer, Diana H. Bacon, Randall A. Locke, Hongbo Shao, Elizabeth H. Keating, Kayyum Mansoor, Sallie E. Greenberg, Liange Zheng, Abbas Iranmanesh, Susan A. Carroll |
|---|---|
| Rok vydání: | 2017 |
| Předmět: |
Hydrology
geography Environmental Engineering geography.geographical_feature_category Specific storage Site selection Aquifer 02 engineering and technology 010501 environmental sciences Carbon sequestration 01 natural sciences Permeability (earth sciences) 020401 chemical engineering Risk analysis (business) Environmental Chemistry Alluvium 0204 chemical engineering Geology Groundwater 0105 earth and related environmental sciences |
| Zdroj: | Greenhouse Gases: Science and Technology. 7:1020-1034 |
| ISSN: | 2152-3878 |
| Popis: | The National Risk Assessment Partnership (NRAP) has developed a suite of tools to assess and manage risk at CO2 sequestration sites. The NRAP tool suite includes the Aquifer Impact Model (AIM), which evaluates the potential for groundwater impacts from leaks of CO2 and brine through abandoned wellbores. There are two aquifer reduced-order models (ROMs) included with the AIM tool, a confined alluvium aquifer, and an unconfined carbonate aquifer. The models accept aquifer parameters as a range of variable inputs so they may have broad applicability. The generic aquifer models may be used at the early stages of site selection, when site-specific data is not available. Guidelines have been developed for determining when the generic ROMs might be applicable to a new site. This paper considers the application of the AIM to predicting the impact of CO2 or brine leakage were it to occur at the Illinois Basin Decatur Project (IBDP). Results of the model sensitivity analysis can help guide characterization efforts; the hydraulic parameters and leakage source term magnitude are more sensitive than clay fraction or cation exchange capacity. Sand permeability was the only hydraulic parameter measured at the IBDP site. More information on the other hydraulic parameters could reduce uncertainty in risk estimates. Some non-adjustable parameters are significantly different for the ROM than for the observations at the IBDP site. The generic ROMs could be made more useful to a wider range of sites if the initial conditions and no-impact threshold values were adjustable parameters. © 2017 Society of Chemical Industry and John Wiley & Sons, Ltd. |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|
Plný text