Preparation of tetragonal zirconia microspheres as surrogate precursor for uranium nitride microspheres
Autor: | Ma Jingtao, Xing Cheng, Changsheng Deng, Shijiao Zhao, Bing Liu, Xuping Lin, Xingyu Zhao, Ziqiang Li, Shaochang Hao |
---|---|
Rok vydání: | 2020 |
Předmět: |
Nuclear and High Energy Physics
Thermogravimetric analysis Materials science Scanning electron microscope 020209 energy Mechanical Engineering 02 engineering and technology Nitride 01 natural sciences Nanocrystalline material 010305 fluids & plasmas chemistry.chemical_compound Tetragonal crystal system Nuclear Energy and Engineering Chemical engineering chemistry 0103 physical sciences 0202 electrical engineering electronic engineering information engineering General Materials Science Cubic zirconia Crystallite Safety Risk Reliability and Quality Waste Management and Disposal Uranium nitride |
Zdroj: | Nuclear Engineering and Design. 362:110542 |
ISSN: | 0029-5493 |
Popis: | Zirconia (ZrO2) microspheres are of great interest as a surrogate precursor material for preparation of uranium nitride (UN) microspheres in High Temperature Reactor (HTR). However, the crystallite transformation of ZrO2 microspheres in cooling process causes cracking of the microspheres. In our study, crack-free nanocrystalline ZrO2 microspheres were obtained. The tetragonal phase was stabilized at room temperature without doping any stabilizing additives. Firstly, gel microspheres were prepared through internal gelation process. Subsequent heat treatment of gel microspheres in nitrogen was conducted. The effect of heat treatment was investigated by using simultaneous thermogravimetric analysis and differential scanning calorimetric analysis (TGA/DSC). By using X-ray diffraction (XRD), optical microscopy, and field-emission scanning electron microscopy (FE-SEM), the phase compositions, morphology and microstructures of the heat treated microspheres were characterized. The ZrO2 microspheres treated at 800 °C exhibit room-stabilized tetragonal zirconia phase, with uniform size of 650 ± 15 μm, good sphericity of 1.02 ± 0.01, and relatively high crush strength 122.5 ± 13.8 N/sphere. Finally, a preliminary nitridation was conducted. Those room-stabilized tetragonal zirconia microspheres can be used as a good surrogate precursor for subsequent preparation of nitride microspheres. |
Databáze: | OpenAIRE |
Externí odkaz: |