Solidification analysis of aluminium engine block
| Autor: | Jose Talamantes, S. Valtierra, Rafael Colás, Andrés Rodríguez |
|---|---|
| Rok vydání: | 2004 |
| Předmět: | |
| Zdroj: | International Journal of Cast Metals Research. 17:332-338 |
| ISSN: | 1743-1336 1364-0461 |
| Popis: | Two V-8 engine blocks with cast-in grey iron liners were cast from a heat-treatable aluminium alloy. These blocks were instrumented by the insertion of 24 type K thermocouples placed at different points in the casting to record the thermal evolution during solidification. One of the blocks was cast after heating up the liners by induction, whereas the second was cast without the use of induction heating. The temperature–time readings from the thermocouples were obtained for thermal analysis. The solidification reactions detected were the formation of primary pre-eutectic aluminium dendrites, and two different eutectics that corresponded to Al–Si and complex Al–Si–Mg–Cu aggregates. It was found that the different solidification reactions were affected by the use of induction to heat up the liners, and by the chilling effect caused by a grey iron inset located at the bottom of the engine block moulds. The results indicate that solidification starts either at the window (bottom) or deck (top) positio... |
| Databáze: | OpenAIRE |
| Externí odkaz: |
|