| Popis: |
During production of cemented carbides hard and brittle tungsten carbide (WC) and ductile metal powders (mainly from Fe-group) are milled together. Complete milling results in a Gaussian distribution and narrow particle size range of the milled powder which promote the homogeneity and improve the properties of sintered composites. Cobalt, conventional metal employed in cemented carbides, possesses good comminution characteristics with WC powder. However, its toxicity and fluctuating price pushes researchers to find suitable alternatives and Fe-based alloys have shown most promising results. Cemented carbides with the Fe-Cr system as metal binder phase have potential to perform better than regular WC-Co composites in corrosive and oxidative environments. The goal of this paper was to prepare uniform cemented carbides powders with relatively high fraction of stainless Fe-Cr steel. To achieve a uniform powder mixture is a challenge at high ductile steel fraction. High energy milling (HEM) is a powerful technique for achieving (ultra) fine powder mixtures with narrow powder size range. HEM was carried out in a novel high energy ball mill RETSCH Emax. Milling in tumbling ball mill, which is the most widely used method, was employed for reference. Prepared powder mixtures were characterised in terms of particle size, size distribution and shape. In addition, powder mixtures were consolidated via spark plasma sintering to evaluate the effect of the milling method and the duration on the microstructure of final cemented carbide. |
